Fotolab Mar del Plata

Revelado de fotos y venta de productos de fotografía

How To Warp In Photoshop?

Photoshop

How To Warp In Photoshop
Understanding the Warp Tool In Photoshop – Photoshop’s warp tool lets you do just that – warp an image. You can take a selection and drag to reshape it however you want. The warp tool can be accessed by going to Edit at the top of the screen, then selecting Transform, and then Warp.

  1. You can also access it by clicking Ctrl+T on a PC or Command+T on a Mac.
  2. Then right-click on PC or control-click on a Mac for the menu and select Warp.
  3. A grid appears over your selection, whether it’s the entire image or just part of it.
  4. You can then click and drag along any line of the grid or any point on the edge of the grid to start warping.

Once you begin to warp, you’ll notice that the four corner points have handles you can grab to farther warp. The warp tool also has a list of handy automated shape options built into it! You can access these from the pull-down menu at the top of the Photoshop screen while in the warp tool mode. How To Warp In Photoshop How To Warp In Photoshop

How do I warp an image into a shape in Photoshop?

Warp images, shapes, and paths in Adobe Photoshop

  2. Introduction to Photoshop
  3. Photoshop and other Adobe products and services
  4. Photoshop on the iPad
  5. Photoshop on the web beta
  6. Cloud documents
  7. Workspace
  8. Web, screen, and app design
  9. Image and color basics
  10. Layers
  11. Selections
  12. Image adjustments
  13. Adobe Camera Raw
  14. Image repair and restoration
  15. Image enhancement and transformation
  16. Drawing and painting
  17. Text
  18. Filters and effects
  19. Saving and exporting
  20. Color Management
  21. Web, screen, and app design
  22. Video and animation
  23. Printing
  24. Automation
  25. Content authenticity
  26. Photoshop 3D

The Warp command lets you drag control points to manipulate the shape of images, shapes, or paths, and so on. You can also warp using a shape in the Warp pop‑up menu in the options bar. Shapes in the Warp pop‑up menu are also malleable; you can drag their control points. Updated in Photoshop 22.5 (August 2021 release) Using Warp

  1. Select a layer or an area in the image you want to warp.
  2. After making a selection, do one of the following:
    • Choose Edit > Transform > Warp or
    • Press Control + T (Win) / Command + T (Mac), then click the Switch Between Free Transform And Warp Modes button in the options bar.
  3. Click the gear icon in the Options bar to see additional visual Guide options. With Photoshop 22.4.1 (May 2021 release), the visual guides have returned better than ever with additional Guide options. You can now set the warp guide display option and choose when to show the visual guides – Auto Show Guides, Always Show Guides, and Never Show Guides, By default, the Grid is set to Always Show Guides, You also have the ability to change the Color and Opacity of the visual guides and the number of lines that make up the guide. The Density option sets how many lines appear between each Split Warp line. By default, Density is set to 2. When using the control points to distort an item, you can also choose View > Extras to show or hide the warp mesh and control points.
  4. To warp your selection using a warp preset, choose a warp style from the Warp pop‑up menu in the options bar. To create a custom warp mesh, choose a grid size from the Grid pop-up menu in the options bar.
    • Select a grid size – Default (1×1), 3×3, 4×4, or 5×5.
    • Select Custom and then specify the numbers of Columns and Rows in the Custom Grid Size dialog.
  5. To add more control grid lines to the warp mesh, choose an option to split the warp.
    1. Do any of the following:
      1. In the options bar, click any of the Split buttons.
      2. Choose Edit > Transform > Split Warp Horizontally, Split Warp Vertically, or Split Warp Crosswise,
    2. Move the pointer within the mesh area and click where you place additional control grid lines. As you move the pointer, over the warp mesh, you’ll see the split lines track the pointer. When you click, additional control points are added to the warp mesh.

    To learn more about split warp options, see,

  6. Do one or more of the following:
    • To manipulate the shape, drag the control points, a segment of the bounding box or mesh, or an area within the mesh. When adjusting a curve, use the control point handles. This is similar to adjusting the handles in the curved segment of a vector graphic.
    • Click on a grid line to activate control points for editing the warp. Click on an anchor point (at the intersection of the grid lines) lets you edit the control points surrounding that anchor. Drag the control points to warp the image.
    • To select multiple points, Shift+click on the anchor points or click-and-drag the pointer over the points while holding down the Shift key. A rectangle appears around the selected points if two or more points are selected.
    • To deselect multiple points, Shift+click on the active anchor points or click-and-drag the pointer over the active points while holding down the Shift key. The rectangle surrounding the selected points automatically resizes as points are selected or deselected.
    • To delete a selected grid line (control points along the line are visible), press Delete or choose Edit > Transform > Remove Warp Split,
    • To delete both the horizontal and vertical grid lines passing through an anchor point, click the anchor point, then press Delete or choose Edit > Transform > Remove Warp Split,
    • To change the orientation of a warp style that you chose from the Warp menu, click the Change The Warp Orientation button in the options bar.
    • To change the reference point, click a square on the Reference point locator in the options bar.
    • To specify the amount of warp using numeric values, enter the values in the Bend (set bend), X (set horizontal distortion), and Y (set vertical distortion) text boxes in the options bar. You can’t enter numeric values if you have chosen None or Custom from the Warp Style pop‑up menu.

    A custom Split Warp has been applied around the neck of the bottle. The Density for the visual Guides has been set to 4; there are four guidelines between each Split Warp.

    When you warp a bitmap image (versus a shape or path), the image becomes slightly less sharp each time you commit a transformation; therefore, performing multiple commands before applying the cumulative transformation is preferable to applying each transformation separately.

Introduced in Photoshop 23.4 (June 2022 release) Packaging designers, we heard you! With this release, Photoshop is introducing the Cylindrical Transform Warp capability which allows curving flat artwork to a rounded cylindrical surface. Also, you get resizing and perspective controls so the entire selection can fit naturally. To work with the new cylindrical transform warp, do the following:

  1. Select a layer or region in the image you want to warp.
  2. Choose Edit > Transform > Warp from the menu bar or press Command+T (Mac) or Control+T (Win).
  3. Click the Free Transform / Warp Modes button in the options bar.
  4. Go to the Warp dropdown menu in the options bar and select the bottom icon: Cylinder.
  5. Click & drag the on-screen controls to shape-adjust the warp:
    • Corner controls: use the bottom/left and top/right resizing controls to freely transform the entire selection.
    • Corner controls + shift constrain proportions.
    • Curvature controls:
      • Top-center changes the arc of the upper and lower boundaries in unison.
      • Bottom-center adjusts the lower boundary line arch only.
    • Control the Perspective by moving the center control point to the right and left.

    A. Adjusts curvature at both the top and bottom B. Sets the top-right corner C. Adjusts perspective. Slide to the center to appear further away, slide to the right to appear very close D. Adjusts bottom curvature, independent of the top E. Sets the lower-left corner You can also apply the cylindrical transform warp to Text layers while working on your creative documents.

With the August 2021 release of Photoshop 22.5, you can now use the Control (Win) / Command (Mac) modifier key to quickly toggle through the split warp options without returning to the menu bar.

  • Hold down the Control (Win) / Command (Mac) key and click anywhere the warp mesh to split the warp crosswise at that location.
  • Hold down the Control (Win) / Command (Mac) key and move the pointer near the edge of an existing horizontal grid line. Click to split the warp vertically at that location.
  • Similarly, hold down the Control (Win) / Command (Mac) key and move the pointer near the edge of an existing vertical grid line. Click to split the warp horizontally at that location.

How do you distort and warp in Photoshop?

Apply the Spherize filter –

  1. In the Edit workspace, select an image, layer, or a specific area.
  2. Choose Distort > Spherize from the Filter menu.
  3. For Amount, enter a positive value to stretch the image outward as though it were wrapped around a sphere. Enter a negative amount to compress the image inward as though it were wrapped inside a sphere.
  4. For Mode, choose normal, horizontal, or vertical, and then click OK.

The Twirl filter rotates an image or selection more sharply in the center than at the edges. Specifying an angle produces a twirl pattern. You can drag the slider to the right into positive values to twirl the image clockwise, drag the slider to the left into negative values to twirl counterclockwise, or enter a value between ‑999 and 999.

  1. In the Edit workspace, select an image, layer, or a specific area.
  2. Choose Distort > Wave from the Filter menu.
  3. Select a wave type in the Type section: Sine (creates a rolling wave pattern), Triangle, or Square.
  4. To set the number of wave generators, drag the slider or enter a number between 1 and 999.
  5. Drag the minimum and maximum Wavelength sliders to set the distance from one wave crest to the next. Set both sliders to the same value to create a consistent pattern of wave crests.
  6. Drag the minimum and maximum Amplitude sliders to set the wave strength.
  7. Drag the horizontal and vertical Scale sliders to set the height and width of the wave effect.
  8. To apply random results based on the set of values in the dialog box, click Randomize. You can click Randomize multiple times to get more results.
  9. Select one of the following and click OK: Wrap Around Fills the voids in the image with content from the opposite edge of the image. Repeat Edge Pixels Extends the colors of pixels along the image’s edge in the direction specified.

The ZigZag filter distorts a selection radially, depending on the radius of the pixels in your selection.

  1. In the Edit workspace, select an image, layer, or a specific area.
  2. Choose Distort > ZigZag from the Filter menu.
  3. Drag the Amount slider to set the level and direction of distortion.
  4. Drag the Ridges slider to set the number of direction reversals for the zigzag from the center to the edge of the selection.
  5. Choose a displacement option from the Style menu and click OK: Around Center Rotates the pixels around the center of the selection. Out From Center Produces a rippling effect toward or away from the center of the selection. Pond Ripples Produces a rippling effect that distorts the selection to the upper left or lower right.

Can you warp shapes in Photoshop?

Download Article Download Article In Adobe Photoshop, the Warp tool allows you to quickly manipulate and deform images via a grid-like system of control points. In addition to images, shapes and paths can also be warped. To activate the Warp tool, select the layer/image/etc. you want to manipulate, then click Edit > Transform > Warp,

  1. 1 Open a new document in Photoshop. Load an image that you would like to warp.
  2. 2 Select the layer that you would like to warp. Click the layer that you want to warp in the Layers panel.
    • If the layer is locked, as it usually is on JPG and PNG images, click the Lock icon to unlock it. Alternatively, drag the layer onto the New Layer icon to create a duplicate, editable layer. The Warp tool does not work on the background.

    Advertisement

  3. 3 If desired, select a subsection of the layer. At this point, you can use one of the selection tools (such as the Lasso Tool or the Rectangular Marquee Tool in the Toolbox) to select the area you want to warp. Use these exactly as you normally would to select the portion of the layer you want.
    • To keep your work more manageable, consider making a new layer from your selection ( Ctrl + J ).
    • Note: If you select nothing, everything in the layer warps by default.
  4. 4 Select Edit > Transform > Warp. This should put a grid-like mesh over the layer or selection.
    • At this point, you can start warping the image. Click here or scroll down to the section below to learn how to warp.
  5. 5 Alternatively, activate the Transform tool with Ctrl + T, At the right end of the options toolbar, you should see a button that looks like a curved grid over a curved arrow. Press this button to switch between the free transform and warp modes.
    • With the Transform tool active, you can also just right click on the selection and select “Warp” to get the same effect.

    6. Advertisement

  1. 1 Click and drag the areas of the grid to manipulate the image. When you select an image for warping, a gridded mesh should automatically appear over it. Clicking and dragging any part of this mesh will cause the image underneath to deform in the direction you drag it. This can take a little getting used to, so you may want to practice before you save your work.
    • You can click any of the control points (the dots highlighted on the edge of the grid), one of the intersections of the grid lines, or an area inside the grid — any will work.
  2. 2 Use the control point handles to get the curves just right. When you bend or curve your image with the warp tool, you will see short line segments with dots at the end appear in the grid. Clicking and dragging these “handles” allows you to fine-tune the curves in your warped image.
  3. 3 Use the pop-up menu to warp to a specific shape. You don’t have to warp your image by free-hand — you can also warp it to one of several preset shapes. To do this, once your image is selected for warping, look for the Warp pop-up menu in the Options bar. Here, you can choose a warp style that fits your needs.
  4. 4 Use the Warp options to further manipulate your image. In the Warp pop-up in the Options bar, there are several more options that can help you modify the warped image. These are:
    • Change Warp Orientation: The button looks like a curved grid next to a down arrow and a right arrow. This turns the warped section between vertical and horizontal orientations.
    • Change Reference Point: The button looks like a black square surrounded by a border of white squares.
    • Define Warp Numerically: Enter numbers in the Bend X and Y boxes to set precisely how much to warp the image.
  5. 5 Finalize your edits. When you’re satisfied with your image, confirm the changes you’ve made. There are two ways to do this:
    • Simply hit the ↵ Enter key ( ⏎ Return on Macs).
    • Click the check mark button in the Options bar.
    • To cancel your work, press Esc or click the cancel button next to the check mark button.

    6. Advertisement

  1. 1 Select an image to puppet warp. In Photoshop, the Puppet Warp tool is a quick, freehand way of manipulating an image related to the Warp tool. To use it, follow these steps:
    • Create a layer with the image you want to warp.
    • Make sure the layer is selected in the Layers panel.
    • Select Edit > Puppet Warp from the menu bar.
  2. 2 Lay down points on the image. When the image is selected for puppet warping, clicking will add “pins” (signified by small dots). Dragging one pin after it’s placed will warp that portion of the image. All of the other pins will “lock” the area around them in place, preventing it from being distorted.
    • Because of the way the pins work, it’s usually a good idea to put a few pins in crucial locations on the image you want to warp. For instance, if you’re using the Puppet Warp tool to move the position of someone’s arm, you might put a pin on her hand, another on her elbow, and a third on her shoulder. This way, when you move any of the three, the rest of the arm won’t deform by much.
  3. 3 Drag the points to manipulate the image. Once you’ve placed your array of pins, you can click and drag any pin individually to move it. This will warp the image accordingly, pushing or pulling the area around the pin as you move it. Puppet warping can take some time to master, but it’s a quick, convenient way to make adjustments once you know how to use it.
    • With a point selected, you can use the arrow keys to make very minor adjustments.
    • Note that you can ⇧ Shift + click to select multiple points at once.
  4. 4 Use the Pin Depth feature to move parts of the image behind itself. If you want to warp the image so that part of it goes behind another part, first, select the pin(s) on the screen you want to adjust. Then, use the “up” and “down” buttons next to “Pin Depth:” in the Options bar to move the selected portion in front or behind the rest.
  5. 5 Use the Puppet Warp options to edit the image. The following selections in the Options bar can be used to modify the way that the Puppet Warp tool works:
    • Mode: Adjusts how drastic the changes you make are. “Distort” makes your image especially elastic while “Rigid” makes your changes more minor.
    • Expansion: Allows you to expand or contract the outer edge of the mess formed by your pins.
    • Density: Allows you to change the spacing of mesh points. More points gives you greater precision, but can tax your computer. Fewer points make your changes quicker but less precise.
  6. 6 Confirm your changes as normal. When you’re satisfied with your work, press ↵ Enter to apply your changes. Alternatively, click the check mark button in the Options bar.
    • As noted above, Esc or the cancel button in the Options bar will undo your work.

    7. Advertisement

Ask a Question 200 characters left Include your email address to get a message when this question is answered. Submit Advertisement

  • An easy way to warp an entire layer with Puppet Warp is to put a pin in each corner of the image. Pulling these around allows you to quickly adjust the entire image as needed.

Thanks for submitting a tip for review! Advertisement Thanks to all authors for creating a page that has been read 132,164 times.

How do you manipulate a shape in Photoshop?

Editing shapes in Photoshop Elements

  2. Introduction to Photoshop Elements
  3. Workspace and environment
  4. Fixing and enhancing photos
  5. Adding shapes and text
  6. Guided edits, effects, and filters
  7. Working with colors
  8. Working with selections
  9. Working with layers
  10. Creating photo projects
  11. Saving, printing, and sharing photos
  12. Keyboard shortcuts

If a layer contains multiple shapes, you can reposition all the shapes together using the Move tool. However, if you want to reposition a specific shape in a layer, you must use the Shape Selection tool.

  1. Use the Shape Selection tool to select shapes:
  2. To select the shape, click it.
  3. To move the shape, drag it to a new location.
  1. Select the Shape Selection tool, and then select the Show Bounding Box option.
    • Click the shape you want to transform, and then drag an anchor to transform the shape.
    • Select the shape you want to transform, choose Image > Transform Shape, and then choose a transformation command.

How do we warp and bloat a layer in Photoshop?

Liquify Tool Definitions and Hotkeys – How To Warp In Photoshop Liquify tools with labels and hotkeys. Let’s start by defining each Photoshop Liquify tool, and then we will use some of them to edit a portrait. The hotkeys associated with each tool are in parenthesis. Here are the Liquify tools in order from top to bottom:

Forward Warp (W) allows you to push pixels around by clicking and dragging on them. Reconstruct (R) selectively erases changes by clicking and dragging on the area. Smooth (E) smooths edges and wrinkles. Twirl (T) twists pixels in a clockwise direction. To swirl counterclockwise, hold the Option or ALT key. Pucker (S) pulls pixels to the center of the brush. It makes the center area smaller. Bloat (B) moves pixels away from the center of the brush. It makes the center area larger. Push Left (O) warps pixels to the left as you drag it. To drag right, hold the Option or ALT key. Freeze Mask (F) lets you select an area that will not be affected by the liquify tools. A red overlay mask will appear over the selected area. Thaw Mask (D) selectively removes a mask from a selected area. Face Select (A) chooses faces in your image. This allows only the face shape to be changed. Move Image (H) or the Hand tool, moves the image around your workspace. Zoom (Z) magnifies the image for more detailed work.

How do I reshape a rectangle in Photoshop?

Editing shapes in Photoshop Elements

  2. Introduction to Photoshop Elements
  3. Workspace and environment
  4. Fixing and enhancing photos
  5. Adding shapes and text
  6. Guided edits, effects, and filters
  7. Working with colors
  8. Working with selections
  9. Working with layers
  10. Creating photo projects
  11. Saving, printing, and sharing photos
  12. Keyboard shortcuts

If a layer contains multiple shapes, you can reposition all the shapes together using the Move tool. However, if you want to reposition a specific shape in a layer, you must use the Shape Selection tool.

  1. Use the Shape Selection tool to select shapes:
  2. To select the shape, click it.
  3. To move the shape, drag it to a new location.
  1. Select the Shape Selection tool, and then select the Show Bounding Box option.
    • Click the shape you want to transform, and then drag an anchor to transform the shape.
    • Select the shape you want to transform, choose Image > Transform Shape, and then choose a transformation command.

What is the command for distort in Photoshop?

Selecting Skew, Distort And Perspective From The Keyboard – With Free Transform active, you can temporarily switch to the Skew, Distort or Perspective modes directly from the keyboard without having to select them from any menu. To switch to either the Skew or Distort mode, just hold down your Ctrl (Win) / Command (Mac) key as you drag a side or corner handle.

How do you transform in Photoshop?

Straightening and Cropping an Image The Crop Tool allows you to straighten and remove unwanted parts of an image and straighten at the same time. The crop tool has many new features to help you get the best crops. Follow the directions below to learn how to use the crop tool and its features. Straighten an Image 1. Select the Crop Tool ( ) from the Tools Palette, A crop box will appear around the edges of your image.2. If your image needs straightened, click on the straighten button ( ) in the Options Palette. Click and drag across the line or plane you wish to straighten. Once you release the mouse, the image will automatically straighten. How To Warp In Photoshop Using the Straighten Tool How to Crop an Image Crop an Image 1. Select the Crop Tool ( ) from the Tools Palette, A crop box will appear around the edges of your image.2. Grab one of the corner handles on the crop frame and drag it to adjust the size of thecrop box. Adjust the crop box using the handles until it is at the desiered size.4. To accept the crop, push RETURN / ENTER on your keyboard or click on the checkmark ( ) in the Options Palette,

How do you curve an image around an object in Photoshop?

How to Wrap an Image Around an Object in Photoshop Wrapping an image around an object in Photoshop emphasizes the apparent three-dimensionality of the wrapped object, which can make your compositions more engaging. For example, wrapping text around a circle made with the Shape tool and shaded to look spherical will make the circle appear even more spherical.

Launch Photoshop and load the file containing the object you want to wrap an image around. For example, load a PSD file of a sphere. Choose simple objects for your first wrapping attempts, as these are easier to work with. You can find copyright-free images of objects at websites such as Morgue File, Wikimedia Commons and Stockvault (links in Resources). Drag the image you want to wrap around the object from Windows Explorer. Photoshop places the image onto its own layer, which appears in the Layers panel. Click “Edit | Transform | Warp” to run the Free Transform Warp option. Click the “Warp” control on the Options toolbar above the canvas to display a list of Warp presets for shaping your wrapped image. Click the preset that best matches the object you wish to wrap around. To wrap around a sphere, the “Bulge” and “Inflate” options are appropriate choices. Click the “Custom” option from the Warp control. This permits you to customize the shape of the preset you chose. Click on one of the points of the grid covering the image, and then drag to shape the grid so that the image appears to fit the underlying object more tightly. For example, if you are wrapping a brick image to a sphere, drag the points of the Free Transform grid so that the brick edges in the top half of the sphere bow upward, and the brick edges in the bottom half bow downward. To drag the entire grid for better positioning without moving the individual grid points, press and hold “Ctrl” and drag anywhere on the grid to move it. Press “Enter” when the image fits tightly to the object. Click the “Blending” mode list at the top of the Layers panel to display a list of blending modes. Click the “Overlay” item to apply that mode to the wrapping image. “Imagery in Overlay” mode allows imagery in underlying layers to pass through, effectively coloring the imagery in those layers. This causes the wrapping image to take on the shading of the object it is wrapped around, making the image appear to be on the surface of the object.

: How to Wrap an Image Around an Object in Photoshop